Welcome to the official website of Wuxi Hengtong Metal Framing System Co.,Ltd.

Messages |Office |Chinese
Key Words:

P41 Series Cushion Clamps for O.D.Tubing | Post Base | Angle Fittings | “U”Shape Fittings

Product Search


Address:No 6 East Dingxiang Road,Hudai Industry Zone,Wuxi City
Tel:+86 0510-68783382
   +86 0510-68783383
   +86 0510-68783391
Fax:+86 0510-68783390
Zip code: 214161

Home> Car modification project, fixed point and bearing seat

 Car modification project, fixed point and bearing seat

Such as the use of the car seat, the seat must be fixed in the body or frame, each seat has 4 mounting points, with a diameter of at least 8 mm of bolt fixed, while using the reinforcement plate.

The minimum contact surface between the

bearing, the body or frame and the reinforcing plate shall be not less than 40 square centimeters, and the thickness of the reinforcement plate shall not be less than 3 mm.




recommends the use of the game special seat approved by the FIA registered. Dismantle the rear seat and back cushion.

as the seat of the adjusting slide bearing, it must be used in the factory original products, together with the original seat. The original seat's head must be placed in the lowest position.